Kohler K-T154-3-BN Installation Guide download pdf (Page 4)

2. Install the Handles

Determine the thickness of the ﬁnished wall.

If the ﬁnished wall is less than 5/8″ (1.6 cm) thick, use the

supplied hardware kit numbered 1031092.

If the ﬁnished wall is 5/8″ (1.6 cm) to 1-1/4″ (3.2 cm) thick, use

the supplied hardware kit numbered 1031091.

Place a stem extension on the valve stem. Secure with the screw

provided.

Thread a threaded sleeve onto the valve body.

Thread a sleeve extension onto the threaded sleeve.

Apply plumbers putty or other sealant to the back of the

escutcheon according to the putty manufacturer’s instructions.

Thread an escutcheon onto the threaded sleeve. Remove any

excess putty or sealant.

Position the handle on the stem extension. Turn the handle to the

closed position (Hot = Counterclockwise, Cold = Clockwise).

Repeat the procedures with the second handle.

Stem Extension

Screw

Escutcheon

Bonnet

Handle

Threaded Sleeve

Valve Body

Setscrew

Sleeve

Extension

Apply plumbers

putty.

1031911-2-A 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Kohler K-T154-3-BN Installation Guide Page 4