Kohler TOILETS K-3378-EB User Manual download pdf (Page 4)

- 4 -

HOW TO REPAIR THE RIALTO, SAN RAPHAEL,

CABERNET, AND PILLOW TALK FLOAT AND

FLUSH VALVE.

INTRODUCTION

The following instructions are used to replace the plunger

assembly on the flush valve for the San Raphael, Rialto,

Cabernet, and Pillow Talk toilets. Refer to Fig.

#11.

Fig. #11

Float Valve Assembly

Screws

Cap Top

Cap

O-ring

Plunger Ass'y

Float Ball

Float Rod

Rim Tube

Supply Hardware

Gasket

Nut

Rim Diverter

Float

1. Loosen the screws and remove the cap top and cap.

2. Replace the Oring and plunger assembly.

3. Place the cap and cap top back on valve. Tighten with

screws.

REPLACING THE TWIST-LOCK FLUSH VALVE

1. Refer to Fig. #12. Turn valve counterclockwise and re

move.

2. To install new valve, apply a bead of silicone to the base

of the gasket. Insert into hole inside tank. Press down

and turn clockwise until valve is in proper position.

Twist Lock Flush Valve

Fig. #12

Flush Ball

Trip Chain

Flapper Hooks

Gasket

REPLACING THE OLD STYLE FLUSH VALVE

(RIALTO AND SAN RAPHAEL ONLY)

1. Refer to Fig. #13. Loosen three screws and turn

mounting hooks inward. Remove flush valve.

2. Assemble gasket to new flush valve. Position new flush

valve with three screws and mounting hooks into hole

in tank. Make sure mounting hooks are turned inward.

Turn mounting hooks outward and tighten screws.

NOTE: TOILETS WITH OLD STYLE FLUSH VALVES CAN

NOT BE FITTED WITH THE NEW TWISTLOCK VALVE.

STARTUP AND OPERATION FOR ROCHELLE

& PALARRE TOILETS

The trip lever assembly actuates the rotor and flush ball to

begin flush.

The float valve assembly controls the flow of water through

the rotor to the rim holes and tank. The adjusting screw

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Kohler TOILETS K-3378-EB User Manual Page 4

Comments to this Manuals

Related products and manuals for Sanitary ware Kohler TOILETS K-3378-EB