Kohler K-102-PB Installation Guide download pdf (Page 3)

Installation

With help, remove the bath from its carton and place it on top of

the protective ﬂoor covering.

Lift the outlet end of the bath until sufficient clearance is obtained

to attach the two front legs.

Insert the fastening bolt through the two washers.

With the load lug resting on the ﬂat of the interior leg, align the

leg with the attachment lug.

Insert the fastening bolt, then wrench tighten.

Repeat the above procedure for the remaining legs.

Once the bath is placed into position with the drain connected,

verify the bath is level and resting on all four legs.

Adjust for Level

Turn the leveling bolts at the bottom of the four legs or place

metal shims under the bath legs to achieve level.

Care and Cleaning

For best results, keep the following in mind when caring for your

KOHLER product:

•

Use a mild detergent such as liquid dishwashing soap and warm

water for cleaning. Do not use abrasive cleaners that may scratch

or dull the surface.

Flat Washers (2)

Leveling Bolt

Attachment Lug

Fastening Bolt

Load Lug

Bath

Kohler Co. 3 1123884-2-B

1 2 3 4 5 6 7 8 ... 15 16

No comments

Kohler K-102-PB Installation Guide Page 3