Kohler K-10588-CP Installation Guide download pdf (Page 4)

Install the Spout (cont.)

Apply thread sealant and install a 1/2″ copper tube to extend

from 2-1/8″ (5.4 cm) to 3-1/2″ (8.9 cm) beyond the ﬁnished wall.

Smooth the edges of the copper tubing.

Loosen the setscrew with a 5/32″ hex wrench.

Apply a bead of plumbers putty or other sealant around the

spout base according to the manufacturer’s instructions. Leave a

small gap free of putty or other sealant at the bottom of the

spout.

Install the spout and carefully retighten the setscrew. Do not

overtighten.

Remove excess putty.

2. Complete the Installation

Turn on the main water supply.

Run the water for approximately one minute to ﬂush the system.

Check all connections for leaks.

1040216-2-A 4 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Kohler K-10588-CP Installation Guide Page 4