Kohler K-11893-BS Installation Guide Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
Tools/Outils/Herramientas
Important Information
WARNING: Risk of personal injury. The wall plates on the grab bar must be
mounted to a brace between the wall studs. Doing so will ensure that the weight
of the user is adequately supported.
WARNING: Risk of property damage. For installation to ceramic tile: Apply
silicone sealant into the drilled holes before securing the wall plates to the finished
surface. This will reduce the risk of water damage behind the finished surface.
CAUTION: Risk of property damage. For installation to ceramic tile: Apply light,
even pressure to avoid cracking the tile. Use a 3/16 or #12 drill bit to drill
through the tile. Do not drill into the bracing.
This product is considered ADA compliant when located and mounted into a
structural support per ADA guidelines. Refer to ADA guidelines before installing
this product.
Before installing finished wall material, install bracing between the wall studs
where the wall plates will be mounted.
The appearance of your product may differ from the illustration. The installation
instructions still apply.
Observe all local plumbing codes and building codes.
Kohler Co. reserves the right to make revisions in the design of products without
notice, as specified in the Price Book.
Informations importantes
AVERTISSEMENT: Risque de blessures corporelles. Les plaques murales sur la
barre d’appui doivent être montées à un renfort entre les montants du mur. En
faisant cela, on assure que le poids de l’utilisateur est supporté de manière
adéquate.
AVERTISSEMENT: Risque d’endommagement du matériel. Pour une installation
sur carrelage: Appliquer du mastic à la silicone dans les orifices percés avant de
sécuriser les plaques murales à la surface finie. Ceci réduira le risque
d’endommagement par eau derrière la surface finie.
ATTENTION: Risque d’endommagement du matériel. Pour une installation sur
carrelage: Appliquer de la pression légère et égale afin d’éviter de craquer le
carreau. Utiliser une mèche de 3/16 ou #12 pour percer le carreau. Ne pas percer
dans le renfort.
Caulk Gun
Pistolet à mastic
Pistola para calafatear
Phillips Screwdriver
Tournevis cruciforme
Destornillador Phillips
• Silicone Sealant
Joint silicone
Sellador de silicona
• Stud Finder
Repéreur de montant
Localizador de postes
de madera
• Bracing
Renfort
Refuerzo
Plus/Plus/Más:
Hex Wrench
Clé hexagonale
Llave hexagonal
Kohler Co. 3 1097577-2-B
Page view 2
1 2 3 4 5 6 7 8 ... 11 12

Comments to this Manuals

No comments