Kohler K-1647-PC-BN Installation Guide download pdf (Page 10)

5. Operating the Steam Control

Steam Control Operation

NOTE: The clock is always displayed in the LED window when the steam is not in use.

Push the ″On/Off″ button to start the steam.

When the button is pushed the green LED light on the ″On/Off″ button turns on and remains on

until the unit is turned off. The LED window reads ″On″ for the ﬁrst three minutes of operation if

the factory settings are not changed.

The current temperature is then displayed until the target temperature is reached.

Push the ″On/Off″ button again to stop the steam. The green LED ″On/Off″ button turns off and

the LED window reads ″Off″ for 5 seconds, then returns to the time of day.

NOTE: When turning the unit on, the steam duration and temperature settings will be based upon the

previous user settings. The settings of a new control unit are 113°F (45°C) for 15 minutes.

Steam Control Adjustment

Make sure the steam control unit is turned ON before making any of the following adjustments.

Press the ON button to activate the steam control unit.

Push the ″On/Off″ button to start the steam. The control window will display ″On″ for three

minutes. If nothing else is adjusted, the clock time will then be displayed.

Push the temperature icon and the LED ﬂashes the previous setting.

To adjust the setting press the up arrow to increase the temperature and the down arrow to decrease

the temperature. The maximum allowed temperature is 125°F (52°C). The minimum operating

temperature is 90°F (32°C).

After 5 seconds, the ﬂashing stops and ambient temperature is displayed as it changes to the target

temperature.

Push the timer icon and the LED ﬂashes the previous setting. Press the up or down icons to adjust

the setting up or down. After 5 seconds the ﬂashing stops and the timer setting is displayed. If the

up or down icons are not pushed the time will continue to count down. The minimum operating

time is 10 minutes, the maximum operating time is 20 minutes.

Push the clock icon and the LED ﬂashes the current time of day setting. Press the up or down icons

to adjust the clock. After 5 seconds, the ﬂashing stops and the set time is displayed.

Press the ″On/Off″ button to stop the steam and exit at any time. The control window will display

″Off″ for ﬁve seconds and default to the clock time.

To toggle the temperature reading between Fahrenheit and Celsius, push and hold the temperature

icon in 3 seconds.

Increase

Timer

Decrease

On/Off

Temperature

Clock

Window

1045320-2-D 10 Kohler Co.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

No comments

Kohler K-1647-PC-BN Installation Guide Page 10