Kohler K-2322-4-47 Installation Guide download pdf (Page 5)

2. Install the Lavatory

Drill 1/4” mounting holes at the marked locations on the ﬁnished

wall and the ﬂoor.

NOTE: You can also use other fastening devices of sufficient size

and strength.

Install the hanger bolts in the wall and ﬂoor so they extend 1-3/8″

(3.5cm) beyond the ﬁnished wall and 1″ (2.5cm) beyond the ﬁnished

ﬂoor.

Install the faucet and drain to the lavatory according to the

manufacturer’s instructions.

Lift the pedestal over the hanger bolt in the ﬂoor. The hanger bolt

will prevent the pedestal from shifting out of place. There is no need

to secure the pedestal to the hanger bolt with a nut.

Carefully set the lavatory on the pedestal so the hanger bolts extend

through the lavatory anchoring holes.

CAUTION: Risk of product damage. Do not overtighten the cap

nuts. Overtightening may damage the product.

Install the washers and cap nuts to the hanger bolts. Level the

lavatory, and carefully tighten the cap nuts until snug.

Connect and tighten the trap to the drain. Complete the water

supply connections to the faucet according to the instructions

packed with the faucet.

Kohler Co. 5 1020685-2-B

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Kohler K-2322-4-47 Installation Guide Page 5