Kohler K-2355-0 Installation Guide download pdf (Page 4)

2. Install the Lavatory

Cut out the opening by carefully following the pencil line traced

from the template.

NOTE: The screws and anchors provided should be used on

countertops with a minimum 1″ (2.5 cm) thickness. For thinner

countertops, use appropriate anchors and fasteners (not provided).

For Wood Countertops

Mark and pre-drill the wood screw holes at the locations shown

on the template.

Waterproof any exposed areas of wood.

For Marble/Stone Countertops

Position the countertop upside down on foam padding to protect

the surface. Mark and drill 3/8″ holes 5/8″ (1.6 cm) deep at the

locations shown on the template.

Use a setting tool and hammer to secure the anchors.

For All Undercounter Installations

If the countertop has not been installed, install it at this time.

Drill the faucet holes according to the faucet installation

instructions.

Install the faucet to the countertop according to the faucet

manufacturer’s instructions.

Foam

Padding

Wood

Screw

Apply

sealant.

Anchor

Screw

Undercounter Installation

Marble

Setting Tool

Anchor

Clamp

1018894-2-J 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Kohler K-2355-0 Installation Guide Page 4