Kohler K-2804-P5-96 Installation Guide download pdf (Page 3)

1007278-2-A

Kohler Co., Kohler, WI, U.S.A.

Turn off the water supply to the faucet.

Open the faucet valves to relieve water pressure, then

disconnect the supply lines.

Disconnect the drain assembly, and remove the trap.

Remove the existing lavatory.

Fig. #6

Faucet

Drain Assembly

Supply Lines

Shut-Off valve

Cut the template on the cut-out line labeled “Self-Rimming

Cut-Out”.

Position the template on the countertop to ensure

clearance between the lavatory, faucet, and backsplash.

Verify cabinet clearance beneath the countertop.

Fig. #7

Use a pencil to trace the template on the countertop.

Re-check the clearance between the lavatory, faucet,

backsplash, and cabinet. Adjust the traced cut-out line

accordingly.

Mark the faucet and handle centerline on the countertop.

Cut out the opening by carefully following the pencil line.

Fig. #8

Template

Trace The Template

Cut-Out

1 2 3 4 5 6 7 8 ... 23 24

No comments

Kohler K-2804-P5-96 Installation Guide Page 3