Kohler K-2838-96 Installation Guide download pdf (Page 4)

2. Self-Rimming Installations

CAUTION: Risk of personal injury or product damage. Cast

iron lavatories are very heavy. Get help lifting the lavatory

into place.

Temporarily position the lavatory in the countertop cutout so the

″Kohler″ logo is to the back. Verify proper ﬁt and clearance.

Remove the lavatory from the countertop.

Install the faucet and drain according to the manufacturer’s

instructions.

Carefully position the lavatory in the countertop cutout so the

″Kohler″ logo is to the back. Verify proper ﬁt and clearance.

Apply a thin, continuous bead of sealant around the lavatory

edges. Immediately wipe away any excess sealant.

Fill any voids between the lavatory and the cutout with sealant.

Verify that the lavatory had not moved out of position.

Allow the sealant to cure for at least 30 minutes before

proceeding.

Connect and tighten the trap to the drain, and complete the water

supply connections to the faucet according to the faucet

manufacturer’s instructions.

Run water into the lavatory and check for leaks.

Clean up with a non-abrasive cleaner.

Sealant

1053432-2-B 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

Kohler K-2838-96 Installation Guide Page 4