Kohler K-2956-8-47 Installation Guide download pdf (Page 4)

Install to a Standard Vanity

For installation to the K-2517, K-2526, K-2527, or K-2529 vanity: Refer to the

installation instructions packed with the vanity.

For installation to a countertop: Proceed to the next section.

Install the drain to the lavatory. If applicable, also install the faucet to the lavatory

at this time. Refer to the faucet and drain manufacturer’s instructions.

Apply a 1/4″ (6 mm) continuous bead of silicone sealant around the top of the

vanity, as illustrated.

IMPORTANT! To ensure proper installation, get assistance aligning and lifting the

lavatory into place.

IMPORTANT! The back edge of the lavatory must be ﬂush against the back of the

vanity and equal left and right overhang on each side of the vanity.

Position the lavatory on top of the vanity.

Verify that the lavatory is level. If the lavatory is not level, gently press down on

the lavatory.

Wipe away excess silicone sealant.

Allow the silicone sealant to set according to the sealant manufacturer’s

instructions.

Complete the water supply and drain connections.

Run water into the lavatory and check for leaks.

Installer sur un meuble standard

Pour installation sur le meuble K-2517, K-2526, K-2527 ou K-2529: Se référer aux

instructions d’installation emballées avec le meuble.

Pour une installation sur comptoir: Procéder à la section suivante.

Installer le drain au lavabo. Si applicable, installer aussi le robinet au lavabo à ce

moment. Se référer aux instructions du fabricant du robinet et du drain.

1092255-2-D 4 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Kohler K-2956-8-47 Installation Guide Page 4