Kohler K-4645-47 Installation Guide download pdf (Page 4)

2. Install the New Toilet

CAUTION: Risk of trap seal loss in back-to-back installations.

To prevent a trap seal loss, back-to-back toilet installations must

be connected to a vertical stack using one of the following three

ﬁttings: double ﬁxture, double combination wye and 1/8 bends,

or double wye and 1/8 bends.

CAUTION: Risk of external leakage. Do not lift or rock the

bowl after placement. If you break the watertight seal, you must

install a new wax seal.

CAUTION: Risk of product damage. Overtightening may cause

breakage or chipping of vitreous china.

Install or relocate the supply and outlet as necessary to conform

to the roughing-in dimensions.

Install a supply shut-off valve.

Record the model number in the Homeowners Guide.

Lay the toilet down onto a padded surface.

From the bottom of the toilet, ﬁrmly press a new wax seal around

the toilet outlet.

Remove the temporary rag (if used) from the toilet ﬂange hole.

Align and lower the toilet over the ﬂange and T-bolts.

Apply your full body weight around the toilet to set the seal.

Carefully tighten the nuts.

Bottom of Bowl

Wax Seal

Bolt Cap

Nut

Washer

Bolt Cap Base

T-Bolt

Closet Flange

1044956-2-B 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 27 28

No comments

Kohler K-4645-47 Installation Guide Page 4