Kohler K-585-NA Installation Guide download pdf (Page 3)

1. Prepare the Counter

With the edges of the template parallel with the edges of the

counter, affix the template to the counter using masking tape.

NOTE: A counter with radius edges is recommended.

Determine the preferred edge treatment for the counter. Consult

with your local counter fabricator for instructions on cutting the

counter edges properly.

Determine which cutout line you will using. If the edge of the

counter will be ﬂush with the edge of the bath rim, you must cut

the inner line. If the edge of the counter will be offset from the

edge of the bath rim, you must cut the outer line.

Using the proper cutting method for your counter type, cut along

the chosen edge of the template cutout line.

Remove the template when cutting is complete.

Smooth the edge of the counter as needed.

Carefully position the counter on top of the bath to ensure correct

ﬁt and appearance. Adjust as necessary.

CAUTION: Risk of property damage. Braces must be

installed to support the weight of the counter from below. Do

not rely on the bath alone to support this weight. Refer to

any instructions supplied with the counter for proper bracing

installation. If braces are not installed, the counter may ﬂex

and possibly damage the bath.

Masking

Tape

Inner Line

Outer Line

Bath

Opening

Counter

Template

Cut along template

inner cut line for

this installation.

Flush

Recommended

Edge

Counter

Bath Rim

Offset

Counter

Cut along template

outer cut line for

this installation.

Bath Rim

Kohler Co. 3 114753-2-CB

1 2 3 4 5 6 7 8 ... 15 16

Comments to this Manuals

No comments

Kohler K-585-NA Installation Guide Page 3

Comments to this Manuals

Related products and manuals for Unknown Kohler K-585-NA