Kohler K-6486-FD Installation Guide download pdf (Page 2)

Tools and Materials

Important Information

CAUTION: Risk of personal injury. Cast iron sinks are

heavy. Get help when lifting or moving.

IMPORTANT! Refer to the ″Roughing-In and Preparation″ section

for cabinet dimensional requirements.

IMPORTANT! The cabinet must be installed and secured, and must

be plumb and level.

IMPORTANT! Long screws may damage adjacent cabinets. Ensure

the screws are long enough to secure the support framing, but short

enough not to extend through the walls of adjacent cabinets.

Due to the nature of under-mount installations, Kohler Co.

recommends that under-mount sink installations be performed by

trained and experienced installers.

Use proper fasteners and techniques to ensure the frame will

support a minimum of 300 lbs (136 kg). Locate the fasteners for

easy access in the event the sink needs to be removed.

For K-5826 Only: This sink is intended for installation into a

standard 33″ base cabinet.

For K-6426 and K-6488: This sink is intended for installation into

a standard 36″ base cabinet.

For K-6486 Only: This sink is intended for installation into a

standard 30″ base cabinet.

Observe all local plumbing and building codes.

Painter's

Tape

Plus:

• Suitable support framing material

[1-1/2" (38 mm)] max thickness

• Screws

Silicone

Sealant

1217971-2-A 2 Kohler Co.

1 2 3 4 5 6 7 ... 35 36

No comments

Kohler K-6486-FD Installation Guide Page 2