Kohler K-702202-L-MX Installation Guide download pdf (Page 21)

9. Install the Inside Panel

NOTICE: Risk of product damage. For the protection of your bath unit, use a drop

cloth or similar material as a protective cover during these steps.

From outside of the shower, install the inside panel ﬁrst. Position the panel with

the rollers toward the inside of the shower.

Carefully lift the inside panel up inside the top track and hang the rollers on the

inside rail.

Roll the panel back and forth along the track to make sure it operates smoothly.

Align the panel with the showerhead side wall jamb.

If the panel does not operate smoothly, adjustment may be needed. If adjustment

is needed, remove the panel.

NOTE: Moving the rollers to the top hole of the hanger brackets will cause the glass

to hang lower. Moving the rollers to the bottom hole of the hanging brackets will

cause the glass to hang higher.

Loosen the roller screw(s) and move the roller to another hole in the hanging

bracket. Insert and tighten the screw(s) and rehang the panel.

Inside Panel

Panneau intérieur

Panel interior

Kohler Co. 21 1063221-2-B

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

No comments

Kohler K-702202-L-MX Installation Guide Page 21