Kohler K-895-0 Installation Guide download pdf (Page 13)

Instale la plomería (cont.)

Haga circular agua en la bañera. Revise que no haya fugas en las conexiones de

desagüe.

Llene la bañera hasta el rebosadero. Veriﬁque que no haya fugas.

7. Complete the Installation – Under-mount Only

CAUTION: Risk of property damage. Do not use adhesive sealant to secure the

counter material to the bath. Adhesive sealant will permanently bond the counter

material to the bath making separation difficult and costly. Instead, use silicone

sealant or caulk which will ease future maintenance or removal of the counter

material.

Clean the rim of the bath.

NOTICE: The bead of silicone sealant or caulk must be placed a minimum of 2″ (51

mm) away from the inside well edge of the rim.

Apply a continuous bead of silicone sealant or caulk to all areas where the rim

and counter material meet.

Align and properly position the counter material over the bath.

Press the counter ﬁrmly onto the bath.

Temporarily set weights on the counter material. This will hold the counter

material in place while the silicone sealant dries.

Apply a continuous bead of clear silicone sealant where the rim and the counter

material meet.

Install the faucet trim according to the manufacturer’s instructions.

Apply silicone sealant.

Appliquer du mastic à la silicone.

Aplique sellador de silicona.

Weights

Poids

Pesas

Apply silicone sealant

or caulk.

Appliquer de la silicone

ou du mastic.

Aplique sellador o sellador

de silicona.

Inside Well Edge

Intérieur du rebord de bassin

Filo interior del fondo

Counter Material

Matériau du comptoir

Material de la cubierta

Kohler Co. 13 1105828-2-B

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Kohler K-895-0 Installation Guide Page 13