Kohler K-1838-K1-BV Installation Guide download pdf (Page 6)

2. Install the Steam Head(s)

NOTICE: Do not obstruct the steam head with shut-off valves, plugs, or caps.

Subtract 1-1/4″ (3.2 cm) from the marked length to determine the appropriate nipple size.

Choose a nipple length within 1/8″ of the appropriate nipple size.

Apply thread sealant to the threads on one side of the nipple and thread that side into the steam

head housing until hand-tight.

Apply thread sealant to the threads on the other end of the nipple.

Position the gasket around the steam head housing so that it will be between the ﬁnished wall and

the steam head housing ﬂange.

Usea1″ socket to thread the steam head housing assembly into the elbow in the wall.

Make sure the gasket is compressed and a good seal has been achieved around the edges of the

steam head housing.

Use an appropriate sealant to achieve a watertight seal if needed.

Press the steam head assembly into the steam head housing with the aromatherapy well positioned

on the top of the steam head.

Steam

Head

Steam Housing

1/2" NPT

Elbow

Steam

Head

Lip

Wall

Aromatherapy

Well

Nipple

Steam

Housing

Apply thread sealant.

Apply

thread sealant.

1069332-2-C 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Kohler K-1838-K1-BV Installation Guide Page 6