Kohler San Raphael Pressure Lite Vitreous China Siphon Je User Manual download pdf (Page 7)

7Kohler Co., Kohler, WI

113362-2-EA (9532)

TROUBLESHOOTING CHART

The troubleshooting guide below is mean to for general aid only. All fittings in this toilet except for the piston nut are preset

by the manufacturer to prevent adjustment. Any attempt to adjust the fittings (except the piston nut and winterizing) may

damage the toilet. Such adjustments for modifications of this product are not normal usage and will void the warranty.

For proper trip lever adjustment procedures, refer to Gap Clearance on Page 6 in these instructions. Any problems not

covered in this chart should be referred to your installer/dealer.

SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION

1. No flush.

A. Supply stop closed. A. Fully open supply stop.

B. Trip lever loose. B. Tighten trip lever nut (turn

counterclockwise to tighten).

C. Trip lever does not actuate piston. C. Adjust piston nut (refer to Page

6).

D. Obstruction within water inlet

components.

D. Replace inlet components (refer to

installer/dealer for assistance).

E. Screen adapter is clogged. E. Disassemble screen adapter and

clean the screen with a medium to

hard bristle brush. (Refer to

installer/dealer or Screen Cleaning,

on Page 6.) Replace the screen if

necessary.

2. Poor flush.

A. Bowl rim holes clogged. A. Clean under bowl rim.

B. Trapway or drain line clogged. B. Plunge bowl, auger trap, auger

drain to clear blockage.

C. System not pressure charged. C. Adjust piston nut for proper

actuation arm gap (refer to Page

6).

D. Supply stop not opened. D. Fully open supply stop.

E. Drain line vent clogged. E. Refer to installer/dealer for

assistance.

F. Screen adapter is clogged. F. Disassemble screen adapter and

clean the screen with a medium to

hard bristle brush. (Refer to

installer/dealer or Screen Cleaning,

on Page 6.) Replace the screen if

necessary.

3. Bowl water

continues to flow or

tank fill water will not

shut off

A. Piston assembly not seating

properly.

A. Adjust gap between trip lever and

piston actuation arm (refer to

Page 6).

shut

off

B. Piston actuation arm binding. B. Repair or replace actuation arm

(refer to installer/dealer for

assistance).

C. Pressure regulator not working. C. Replace unit (refer to

installer/dealer for assistance).

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Kohler San Raphael Pressure Lite Vitreous China Siphon Je User Manual Page 7

Comments to this Manuals

Related products and manuals for Tools Kohler San Raphael Pressure Lite Vitreous China Siphon Je