Kohler K-1375 User Manual download pdf (Page 7)

Operating Your Bath

Starting the Unit

If the unit does not function properly, please refer to the “Troubleshooting” section.

Close the drain.

Fill the bath to a level at least 2” (5.1 cm) above the top of the airjets.

Use your hand to test the water temperature for comfort and safety.

Carefully enter the bath basin.

Press the On/Off button on the user keypad.

Observe that the air system starts and air begins to ﬂow to all zones.

Observe that the chromatherapy lights (if provided) also begin operation in the cycling mode.

If desired, adjust the air ﬂow rate using the up button or the down button.

After about 15 seconds, observe that only the last feature selected remains illuminated on the user

keypad.

Selecting Air Flow Modes

Rotate the outer ring to select a desired mode.

Observe that the selected icon is ﬂashing blue.

Press the ″OK″ button to activate the mode.

Observe that the active mode ﬂashes green and the mode is implemented.

Observe that, after about 15 seconds, the icon stops ﬂashing.

To turn off a mode, rotate the outer ring until the icon is ﬂashing green and then press the “OK”

button again.

The icon will then turn blue indicating the mode is off.

Stopping the Bath

When ready, press the power button a second time to stop the air system.

Carefully exit the bath.

Open the drain to empty the bath.

Air Flow Mode

Activates Mode Selected

Power On/Off

Indicator Bar

Decrease Flow or Surge

Increase Flow or Surge

Zone 1

Zone 2

Zone 3

Surge Mode

Purge Mode

Chromatherapy Specific

Color (if provided)

Chromatherapy Cycle

(if provided)

Rotate Outer Ring to

Access Desired Mode

Kohler Co. 7 1038265-5-B

1 2 3 4 5 6 7 8 9 10 11 12 ... 47 48

Comments to this Manuals

No comments

Kohler K-1375 User Manual Page 7

Comments to this Manuals

Related products and manuals for Unknown Kohler K-1375