Kohler K-15592-5P-CP Installation Guide download pdf (Page 8)

7. Adjust the Maximum Water Temperature

NOTE: Prior to adjustment, make sure the handle is in the

maximum hot position.

Remove the handle and bonnet.

Turn on the water to the maximum hot water temperature by

pushing the valve stem up, and turning it fully clockwise.

Use a pencil or marker to mark the current position of the

temperature stop tab (top edge) on the mounting nut. Lift both

the indexer and the top disc just enough to clear the splines and

to allow rotation.

NOTE: Each indexer notch is an average 9.5°F (5.3°C) change in

temperature.

Turn the indexer, top disc, and valve stem counterclockwise until

you achieve the desired temperature.

Reinstall the indexer and top disc to the valve. Make sure the top

disc is snapped fully into the indexer.

Turn off the water, and reinstall the bonnet and handle.

Cap

O-Ring

Valve Stem

Splines

Screw

Handle

Bonnet

Stop Tab

Mounting

Nut

Indexer

Top Disk

1010442-2-D 8 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Kohler K-15592-5P-CP Installation Guide Page 8