Kohler K-470-4S-BN Installation Guide download pdf (Page 10)

8. Handle Valve Installation

Remove and save the dished washer and nut from the valve

bodies.

Install a ﬂexible hose to each valve body outlet. Tighten securely,

but do not overtighten.

Apply a bead of plumbers putty or other sealant to the underside

of the escutcheons according to the manufacturer’s instructions.

NOTE: The valve body marked ″COLD″ with blue lettered tape

attached to the tube should be installed to the right of the faucet.

Insert the valve bodies into the proper mounting holes.

From the underside of the bidet, slide a dish washer, washer, and

nut onto each valve body.

Rotate each valve body until the copper tubing faces toward the

outside of the bidet and the outlets face each other.

Slide a washer and loosely thread a nut onto each valve body.

Firmly hold the valve bodies in place and then securely tighten

the nuts with a wrench. Do not overtighten.

Remove any excess putty or sealant.

Dish

Washer

End Body

Outlet

Washer

Nut

End Body

Hose

O-Ring

End Body

Disc Washer

(When Required)

Escutcheon

Washer

Nut

Apply Plumbers

Putty.

1010448-2-F 10 Kohler Co.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

No comments

Kohler K-470-4S-BN Installation Guide Page 10