Kohler K-8212-K-CP Installation Guide download pdf (Page 4)

2. Handle Valve Installation

NOTE: The valve body marked ″COLD″ (with blue lettered tape

attached to the tube) should be installed to the right of the faucet.

Apply a bead of plumbers putty or other sealant to the underside

of the escutcheons according to the manufacturer’s instructions.

Insert the valve bodies into the proper mounting holes.

Install a washer and a nut onto the underside of each valve body.

Rotate each valve body until the copper tubing faces toward the

outside of the lavatory.

While holding the valve bodies in place, securely tighten the

locknuts with a wrench. Do not overtighten.

Remove any excess putty or sealant.

Handle

Escutcheon

Apply plumbers

putty.

Valve Body

Copper

Tube

Nut

Washer

1002628-2-P 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 27 28

No comments

Kohler K-8212-K-CP Installation Guide Page 4