Kohler K-1913-LW-47 Installation Guide download pdf (Page 29)

16. Connect the Components

All Installations

NOTE: Depending upon disassembly, some or all of these components may still be connected.

Conﬁrm the O-ring is in place and connect the water inlet to the drain valve by tightening the nut.

Connect the drain valve power at controller J2. Do not plug the drain valve power cord into a

receptacle other than J2.

Connect the level sensing wires at controller J3.

Connect the limit switches at controller J4.

NOTE: Port J5 should remain unused.

Connect the door power at controllers J6 and J7.

J1 - Power Cord to Wall Outlet

J2 - Power Cord to Drain Valve

Attach the drain.

Connect to controller, J2.

Water Inlet

Drain Valve

Nut

and O-Ring

Controller

J3 - Connection for Level Sensing Probes

J4 - Connection for Limit Switch Wires

J5 - Open

(Alternate for Level Sensing Probes)

J6 / J7 -

Power Cord Connection to Door

Kohler Co. 29 1128532-2-G

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 155 156

No comments

Kohler K-1913-LW-47 Installation Guide Page 29