Kohler K-12172-PB Installation Guide download pdf (Page 6)

5. Optional Temperature Limiting Adjustment

NOTE: Before making any adjustments, ensure that the handle is

turned all the way to the left to the maximum hot position.

Remove the plug button and screw from the handle.

Remove the handle and bonnet from the faucet body.

Lift the valve stem up and off the stop tab. The water will turn

on.

Align the stop tab with the mounting nut to establish the

maximum temperature.

Mark the maximum temperature on the mounting nut with a

marker or pencil.

Lift up the indexer and disk to clear the splines.

NOTE: Each spline notch represents approximately 9.5° F (5.3° C).

Turn the indexer, disk and valve stem counterclockwise, until the

temperature is properly adjusted.

Push down the indexer and disk to cover the splines after the

temperature is adjusted. Ensure that the disk is fully snapped into

the indexer.

Push the valve stem down onto the stop tab. The water will turn

off.

Reinstall the bonnet, handle, screw, and plug button.

Bonnet

Handle

Indexer

Splines

Valve Stem

Plug

Button

Screw

1004617-2-E 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Kohler K-12172-PB Installation Guide Page 6