Kohler K-18865-VS Installation Guide download pdf (Page 5)

2. Connect the Supplies

For all installations:

Install the sink (if needed) according to the sink manufacturer’s

instructions.

Connect the hot and cold water supplies. Left is hot, right is cold.

Tighten all connections.

For installations with a water ﬁltration system (A):

NOTE: Although the water ﬁltration system selected may differ

from the one illustrated (Kohler Model K-200), the instructions still

apply.

Connect the ﬁltration inlet hose to the ﬁltration outlet hose of the

water ﬁltration system. Refer to the installation instructions

packed with the water ﬁltration system.

Turn on the main water supply and check for leaks. Repair as

needed.

Run water through the system for several minutes to remove any

air in the system.

For installations without a water ﬁltration system (B):

Cap the ﬁltration inlet hose with a male plug.

Turn on the main water supply and check for leaks. Repair as

needed.

Cold Water

Supply

Hot Water

Supply

Connect the

water supplies.

Filtration Inlet Hose

Filtration

Outlet Hose

Male Plug

Optional Water

Filtration System

Kohler Co. 5 1068887-2-A

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Kohler K-18865-VS Installation Guide Page 5