Kohler K-4026-0 Installation Guide download pdf (Page 7)

4. Check the Waterline

CAUTION: Risk of property damage. Before use, open the inlet valve using the valve adjustment

screw to avoid overﬂow.

NOTE: The waterline is marked inside the tank by a notch and a label.

Turn the valve adjustment screw counterclockwise to open the motorized valve.

Allow the tank to ﬁll. Check the water level in the tank.

To adjust the water level, use a ﬂat-blade screwdriver to carefully turn the adjustment rod on the

inlet valve. Turning the rod counterclockwise will lower and clockwise will raise the water level.

If further adjustment is required, remove several inches of water from the tank and allow it to reﬁll.

Conﬁrm the water level is correct. Repeat until the correct water level is reached.

Turn off the water supply.

Valve Adjustment

Waterline

Adjustment

Waterline

Flexible Hose

Notch

Kohler Co. 7 1221754-2-B

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

No comments

Kohler K-4026-0 Installation Guide Page 7