Kohler K-T13141-3B-CP Installation Guide download pdf (Page 4)

2. Install Spout

CAUTION: Risk of product damage. Use care when installing

the spout assembly to prevent damage to the O-ring seal on the

sleeve.

Apply a ring of plumbers putty or other sealant around the

underside of the spout base according to the manufacturer’s

instructions.

Position the spout base over the spout supply tube.

Check that the spout base rests on the rim, ﬁnished deck, or tile

surface.

Back off the two setscrews in the sleeve, and with a twisting

motion install the sleeve on the spout supply tube until it contacts

the spout base.

Align the sleeve so the setscrews are not facing directly forward

or backward.

Tighten the sleeve setscrews.

Install the spout onto the sleeve, and carefully press down until

the spout contacts the spout base.

Align the spout and tighten the spout setscrew.

Press the plug button into the setscrew hole.

Spout

Supply

Tube

Apply

plumbers

putty to

spout base.

Spout Base

Spout

Setscrew

Plug

Button

Setscrew

Sleeve

1036138-2-A 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Kohler K-T13141-3B-CP Installation Guide Page 4