Kohler Waterlite showerhead 8023A User Manual download pdf (Page 3)

1063864-AN2-E 17/02/12

Install the Pipe and Elbow

1. Install the water supply pipes.

2. Install the wall mount elbow to the end

of the water supply pipe at the shower

head installation location.

Note! The wall mount elbow, wall plugs

and ﬁxing screws are not supplied with

the product. The installer should use an

appropriate wall ﬁxing arrangement to

suit the wall type or surface.

3. Mark the position of the Wall Mount Elbow. For solid walls

drill the wall Mount Elbow holes with a 7mm diameter drill and

insert the wall plugs (Supplied). For other types of wall structure

alternative fixing may be required (Not supplied)

4. Fix the Wall Mount Elbow to a solid wall or to a frame mounting using the

fixing Screws supplied.

5. Finish the wall leaving a Ø76mm cutout.

6. Temporarily install the Elbow to the nipple. Do not use any sealant.

7. Make sure that the nipple extends 29mm from the finished wall.

If necessary cut the long leg of the nipple to the required length

8. Apply thread sealant to the long leg of the Nipple and install it into the Elbow

9. Run water through the system to ﬂush out any dirt or debris.

Elbow

Finished

Wall

Nipple

29 mm

41 mm Max.

Cutout

Ø 76 mm

G ½”

IONINSTALLAT

Before you Begin

1. Turn off the water supply.

2. Make sure that the Watertile showerhead is installed by a competent

installer.

3. Before installation carefully inspect the new ﬁxture for any signs of damage.

4. Kohler Co. reserves the right to make revisions in the design of products without

notice.

1 2 3 4 5 6 7

No comments

Kohler Waterlite showerhead 8023A User Manual Page 3