Kohler Waterlite showerhead 8023A User Manual download pdf (Page 4)

4

1063864-AN2-E 17/02/12

Install the Watertile Showerhead

Prepare the Housing:

1. Position the housing so that the back of

the leak shield is facing you.

2. Apply a bead of silicone sealant in

the groove around the outside of the

housing. Do not apply silicone sealant

in or near the weep hole.

3. Allow the silicone sealant to cure.

Install the Components:

1. Position the housing with the sealant

side towards the finished wall and

the narrow end of the housing facing

down.

2. Position the so that the nipple is through

the centre and press ﬁrmly against the

ﬁnished wall.

3. Thread the adaptor onto the nipple.

Install the Waterway:

1. Press the waterway into place over the

adaptor.

2. Secure the waterway to the adaptor

with the screw provided. The waterway

will be secure once the housing is

completely seated against the wall and

does not turn or move.

Finished Wall

Housing

Waterway

Adaptor

Double Ribs

Slot

Apply Silicone Sealant

Weep Hole

Leak Shield

1 2 3 4 5 6 7

Comments to this Manuals

No comments