Kohler k-10951 User Manual download pdf (Page 4)

Adjust the Water Temperature

CAUTION: Risk of personal injury. Scalding may result if

the limit stop is not reinstalled properly.

NOTE: The water temperature does not need to be adjusted if the

water temperature is below 105°F (41°C).

NOTE: Use a thermometer rated for 120°F (49°C) or greater.

NOTE: When using a tempered water supply, install the

vandal-resistant plug button.

For Handle Installations

Turn on the water and adjust to the full hot position by turning

the handle toward the back of the faucet until it stops.

Determine the temperature using a thermometer. If the

temperature exceeds 105°F (41°C), complete the following steps.

Turn the handle until vertical.

Attach the cleaning strap over the sensor.

Remove the handle screw using the supplied 2.5 mm hex wrench.

Remove the handle and the limit stop.

Remove the limit stop from the handle splines.

Limit

Stop

Handle

Cleaning

Strap

Screw

Handle

Housing Setscrew

Right Tab

Stop

Vandal-Resistant

Plug Button

Limit

Stop

Tab Edge

1025498-5-H 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 75 76

No comments

Kohler k-10951 User Manual Page 4