Kohler K-1457-LV-47 Installation Guide download pdf (Page 7)

Operation (cont.)

Rotate the outer ring to select chromatherapy speciﬁc color selection, then press OK. Use the up or

down arrow to reach the desired color. Press OK while the chromatherapy speciﬁc color selection is

active to turn off the chromatherapy lights.

Neckjets

NOTE: Before activating the neckjets, make sure the slip cover is in place on the pillow and the pillow is

attached to the neckjet body. If the pillow is not properly installed the neckjets will stop. The neckjet icon

and indicator bar on the user keypad will ﬂash. The neckjets will automatically restart when the pillow is

properly installed.

Rotate the outer ring to select the neckjet mode, then press OK to activate the neckjets. The neckjet

pulsing action will start at medium speed. Press the up or down arrow to adjust the pulsing action.

Rotate the outer ring until the ﬂow mode is ﬂashing, the press OK. Press the up or down arrow to

adjust the water ﬂow volume of the neckjets.

Press OK while the neckjet mode is active, to turn off the neckjets.

NOTE: To activate or deactivate functions while the neckjets are operating, rotate the outer ring until the

desired function is ﬂashing and press ″OK.″

Backjets

Rotate the outer ring until the backjet icon is ﬂashing and press OK. The backjet pulsing action will

start at medium speed. The backjets pulse from the bottom of the whirlpool toward the top, with

water ﬂow and pulse action occurring from two backjets at a time.

NOTE: If the water level falls below the water level sensors, the backjets will stop. The backjet icon and

indicator bar on the user keypad will ﬂash. The backjets will automatically restart when the water level

covers the sensors.

To increase or decrease the backjet pulsing action, press either the up or down arrow buttons on the

keypad, while the backjet mode is active.

To increase or decrease the ﬂow volume to the backjets, rotate the outer ring to the Flexjet mode,

press OK to activate the mode, and press either the up or down arrows on the keypad. This also

increases or decreases the ﬂow to all modes.

Press OK while the backjet mode is active, to turn off the backjets.

Kohler Co. 7 1023236-5-C

1 2 3 4 5 6 7 8 9 10 11 12 ... 75 76

No comments

Kohler K-1457-LV-47 Installation Guide Page 7