Kohler K-2271 User Manual download pdf (Page 3)

1. Preparation

Install the water supplies and drain piping according to the

roughing-in information.

Determine which template cut line corresponds with the lavatory

model to be installed.

Cut out the template where indicated for countertop opening. Cut

along the inside of the cutting line.

Position the template on the countertop.

NOTE: Be sure to provide sufficient spout overhang into the

lavatory basin. See the roughing-in notes for minimum spout length

information.

Check for adequate clearance between the backsplash and

lavatory.

Refer to the wall-mount faucet installation instructions for

required clearance, and mark the preferred faucet hole locations

using a soft lead pencil.

Trace the template on the countertop with a pencil.

Backsplash

Note: When determining cut-out location, allow for adequate

clearance between the backsplash and the lavatory.

Outside Edge

of Lavatory

Cut-out Line

K-2271 K-2273

Kohler Co. 3 1018899-2-A

1 2 3 4 5 6 7 8 ... 15 16

No comments

Kohler K-2271 User Manual Page 3