Kohler K-2271 User Manual download pdf (Page 5)

Install the Lavatory (cont.)

Immediately wipe away any excess sealant, and ﬁll any voids as

needed.

Verify that the lavatory has not moved out of position.

Allow the sealant to cure for at least 30 minutes before

proceeding.

Connect and tighten the trap to the drain, and complete the water

supply connections to the faucet according to the instructions

packed with the faucet.

Run water into the lavatory and check for leaks.

Clean up with a non-abrasive cleaner.

K-2273

Temporarily position the lavatory in the countertop cutout. Draw

a pencil line around the lavatory edge where it touches the

countertop. Remove the lavatory.

NOTE: Do not substitute another sealant for the one provided. The

supplied sealant is required to permanently bond the lavatory to the

countertop.

Apply 1/8″ (3mm) beads of sealant to the countertop surface

according to the illustration.

Set the lavatory into the countertop cutout. Use care to avoid

smearing the sealant beads.