Kohler K-2276-B11 Installation Guide download pdf (Page 4)

1010430-2-A

Kohler Co., Kohler, WI U.S.A.

CAUTION: Risk of personal injury or product

damage. Large lavatories are very heavy. Get help

lifting the lavatory into place.

Temporarily position the lavatory in the countertop cutout

so the “Kohler” logo is visible. The logo is on the inside

basin, near the rim, and should be positioned near the

faucet.

Verify proper clearance between the lavatory, faucet, and

backsplash.

Remove the lavatory from the cutout, and return it to its

protective carton. Do not rest or store the lavatory on the

drain surface.

Drill the faucet holes.

Install the faucet to the countertop according to the

manufacturer’s instructions.

Install the drain to the lavatory according to the installation

instructions included with the drain. Apply a generous

amount of clear silicone sealant when you install the drain.

Fig. #9



  

For tile, wood, or other porous materials, apply waterproof

sealer around the cutout area of the countertop surface.

Follow all manufacturer’s instructions and warnings.

Allow the sealer to dry before proceeding.

Use a 50/50 mixture of isopropyl alcohol and water to

clean the countertop surface around the cutout area.

Wipe dry with a clean cloth.

NOTE: Install the adhesive seal when the temperature is

at least 50° F (10° C). The preferred temperature range to

apply the adhesive seal is 70° F (21° C) to 100° F (37° C).

Loosely apply the adhesive seal (included) around the

entire countertop cutout so it is about 3/16” (5mm) from

the cutout. Adjust the placement of the seal before

removing the backing material. Cut off any excess seal

material. Carefully remove the adhesive seal backing

material.

Fig. #10

Adhesive

Seal

CAUTION: Risk of personal injury or product

damage. Large lavatories are very heavy. Get help

lifting the lavatory into place.

Note the location of the “Kohler” logo. The lavatory should

be installed so the logo is visible after installation.

Carefully position the lavatory in the cutout, and press

down firmly.

Fig. #11

“Kohler” Logo

1 2 3 4 5 6 7 8 9 ... 23 24

Comments to this Manuals

No comments

Kohler K-2276-B11 Installation Guide Page 4

Comments to this Manuals

Related products and manuals for Unknown Kohler K-2276-B11