Kohler K-2364-47 Installation Guide download pdf (Page 4)

2. Install the Lavatory

CAUTION: Risk of personal injury. Vitreous china is heavy. Do

not attempt to lift or install this product without assistance.

Apply two self-adhesive pads to the underside of the lavatory

basin.

Mark the centerline of the pedestal on the ﬂoor with a pencil.

Align the center of the pedestal on the marked centerline.

Place the lavatory onto the pedestal.

Verify the lavatory is level and ﬂush against the ﬁnished wall.

Adjust or add self-adhesive pads as needed.

NOTE: If the bottom of the lavatory contacts the pedestal, reposition

the self-adhesive pads.

Mark the two lavatory anchoring hole locations on the ﬁnished

wall with a pencil.

Mark the pedestal anchoring hole on the ﬂoor through the hole in

the pedestal bottom.

Remove the lavatory from the pedestal. Set the lavatory aside.

Set the pedestal aside.

Drill 3/16″ holes at the marked locations on the ﬁnished wall and

the ﬂoor.

Install the hanger bolts to the wood backing material.

Thread the cap nuts onto the hanger bolts.

Apply two self-adhesive

pads to the underside of

the basin.

Hanger Bolt

Washer

Cap Nuts

Lag Bolt

Washer

The drain and

faucet are not

shown to

improve clarity.

Pedestal

1020683-2-E 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Kohler K-2364-47 Installation Guide Page 4