Kohler K-3597-0 Installation Guide download pdf (Page 2)

Tools and Materials

Before You Begin

WARNING: Risk of personal injury or water damage.

Contents of the vessel are under pressure and can cause

severe injury. Do not open or service before reading these

installation instructions or service instructions. Turn off the

water supply and ﬂush the unit to release pressure before

attempting any service.

CAUTION: Risk of personal injury or product damage.

Handle with care. Vitreous china can break or chip if the

product is handled carelessly.

CAUTION: Risk of product damage. Do not use any oils or

lubricants on or in the pressure system.

IMPORTANT! Make sure the supply pressure is a minimum of 35

psi (2.4 bar). The toilet will not function properly without minimum

pressure.

Observe all local plumbing and building codes.

Carefully inspect the new toilet for damage.

If the existing toilet does not have a supply shut-off valve below

the tank, install one before installing the new toilet.

Toilet is designed for 12″ (30.5 cm) roughing-in.

Kohler reserves the right to make revisions in the design of

products without notice, as speciﬁed in the Price Book.

10" Adjustable

Wrench

Supply

Shut-Off

Valve

Tape

Measure

Tubing Cutter

Safety

Glasses

Sponge

Level

Putty Knife

Wax Seal

Plus:

• 5/16" T-Bolts with Nuts

and Washers

• Metal File

• Toilet Supply Tubing

• Hacksaw

• Screwdriver

1086530-2-A 2 Kohler Co.

1 2 3 4 5 6 7 ... 19 20

Comments to this Manuals

No comments

Kohler K-3597-0 Installation Guide Page 2

Comments to this Manuals

Related products and manuals for Unknown Kohler K-3597-0