Kohler K-8023-BV Installation Guide download pdf (Page 6)

3. Complete the Installation

Attach the Sprayhead

With the ribs of the sprayhead facing up, attach the sprayhead to

the waterway.

Using a 3/16″ hex wrench, secure the sprayhead to the waterway

with the two hex screws provided.

Verify the sprayhead moves freely upward and downward.

Place the nozzle membrane over the sprayhead.

Attach the Sprayface

Tilt the sprayhead downward so the ribs on the top of the

sprayhead are exposed.

Insert the grooves of the sprayface over the ribs of the sprayhead.

Press the sprayface down to cover the sprayhead, as illustrated.

Tilt the sprayhead upward to expose the setscrew holes on the

bottom of the sprayhead.

Using a 7/64″ hex wrench, turn the setscrews counterclockwise

until they are ﬂush with the edge of the sprayface frame.

IMPORTANT! The setscrews must be ﬂush with the edge of the

sprayface frame. If the setscrews protrude outside of the sprayface

frame, product damage will occur.

Sprayface

Ribs

Groove

Finished Wall

Sprayhead

Waterway

Hex Screws

Attach the Sprayhead

Attach the Sprayface

Nozzle

Membrane

Setscrews

1046519-2-B 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Kohler K-8023-BV Installation Guide Page 6