Kohler K-9439-2BZ Installation Guide download pdf (Page 4)

2. Adjust the Handle Assembly

Ensure the valve stem adapter is lightly placed over the spline

adapter.

Place the handle assembly over the valve stem adapter.

Turn the handle assembly clockwise until the stop is contacted.

The valve will be in the full cold position. The handle should be

between the 9 and 10 o’clock positions.

Rotate the handle assembly counterclockwise, through the detent,

then to the high temperature limit stop.

Verify that the handle assembly is between the 3 and 4 o’clock

position.

Rotate back to 6 o’clock position.

Remove the handle assembly and set aside.

To adjust for handle alignment:

NOTE: The spline adapter allows ﬁne adjustment of the handle

alignment.

Remove the handle assembly and the valve stem adapter.

Reposition the spline adapter.

Reinstall the handle assembly and the valve stem adapter.

Check the alignment. Repeat this procedure until the handle

alignment is satisfactory.

Valve

Spline Adapter

Valve Stem

Adapter

Handle

Assembly

1041503-2-H 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 27 28

No comments

Kohler K-9439-2BZ Installation Guide Page 4