Kohler K-3901-0 Installation Guide download pdf (Page 16)

6. Install the Back Cover

NOTE: Install the cover when the water and power supply are routed through the ﬂoor. The cover is not

designed for use when the water or electrical power are connected to wall supplies.

Position the cover over the water supply and electrical supply holes.

Run the docking station cord through the slot in the cover and snap the cover into place on the

supply hose inlet.

Align the spring clip on the cover with the supply hose inlet.

NOTE: The clip will easily snap into place on the supply hose inlet. If there is signiﬁcant resistance, make

sure the clip is not pushing the hose clip out of the way.

Lower the cover and snap the clip into place on the supply hose inlet.

Spring

Clip

Cover

Slot

Docking

Station Cord

Docking Station

Cord

1212876-2-B 16 Kohler Co.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

No comments

Kohler K-3901-0 Installation Guide Page 16