Kohler K-5264-0 Installation Guide download pdf (Page 7)

5. Secure the Fixture

CAUTION: Risk of personal injury or product damage.

Overtightening can cause vitreous china to break or chip.

Place the washer and cap nut over the anchoring stud, and

carefully tighten to secure the drinking fountain.

From the bottom of the access, install the copper supply tube

with the compression ﬁtting between the stop and control valve.

Connect the straight end of the tube to the stop, then connect the

angled end of the supply tube to the control valve until both are

hand-tight.

Secure both nuts with a wrench.

NOTE: The copper supply connection may be bent slightly to ﬁt.

Snap the strainer plate into the strainer body. If necessary, adjust

the drinking fountain head so that the arc of the water is parallel

to the wall.

6. Install the Cover Plates

Check for leaks.

Install the cover plates to the bottom access openings.

Kohler Co. 7 101024-2-AB

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

No comments

Kohler K-5264-0 Installation Guide Page 7