Kohler K-5415-NA Installation Guide download pdf (Page 2)

Tools and Materials

Before You Begin

IMPORTANT! Refer to the ″Roughing-In″ section for cabinet

dimensional requirements.

IMPORTANT! This sink must be installed prior to the installation

of the countertop. Cut-line is based from the front face of the

cabinet.

IMPORTANT! Long screws may damage adjacent cabinets. Ensure

the screws are long enough to secure the support framing, but short

enough not to extend through the walls of adjacent cabinets.

Due to the nature of under-mount installations, Kohler Co.

recommends that under-mount sink installations be performed by

trained and experienced installers.

Use proper fasteners and techniques to ensure the frame will

support a minimum of 300 lbs (136 kg). Locate the fasteners for

easy access in the event the sink needs to be removed.

For K-5417 Only: This sink is intended for installation into a 30″

apron sink base cabinet.

For K-5415 and K-5416 Only: This sink is intended for

installation into a 36″ apron sink base cabinet.

Observe all local plumbing and building codes.

1" Hole Saw

Painter's

Tape

Plus:

• Suitable support framing material

[3/4" (19 mm)] max thickness

• Screws

Silicone

Sealant

Construction

Adhesive

1224364-2-B 2 Kohler Co.

1 2 3 4 5 6 7 ... 27 28

No comments

Kohler K-5415-NA Installation Guide Page 2