Kohler K-7322-4-BS Installation Guide download pdf (Page 4)

2. Install the Faucet Assembly

Slide the mounting plate onto the faucet shank.

Align the groove in the underside of the faucet shank with the

setscrew hole in the mounting plate and secure with the setscrew.

Temporarily install the faucet onto the supply until the mounting

plate is both ﬂush with the wall and the setscrew is facing down.

With a pencil, mark the location of the four mounting holes.

Remove the faucet from the supply.

Remove the mounting plate from the faucet shank.

Drill a 1/4″ hole at each of the four marked locations.

Install an anchor into each of the four holes.

Apply thread sealant to the supply pipe threads.

Slide the gasket and mounting plate over the supply and up

against the ﬁnished wall. Position the mounting plate so the

setscrew hole is facing down.

Line up the holes in the gasket and mounting plate with the

anchors and secure with the four screws.

Mounting Plate

Finished Wall

Escutcheon

Spout

Shank

Gasket

Setscrew

Screw

Small

Setscrew

Supply

Anchor

1047606-2-B 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Kohler K-7322-4-BS Installation Guide Page 4