Kohler K-19480-4-BN Installation Guide download pdf (Page 8)

6. Optional Temperature Limiting Adjustment

NOTE: The water temperature does not need to be adjusted if the

maximum water temperature is below 105°F (41°C).

Lift and turn the lever handle to the full hot position.

Determine the temperature using a thermometer. If the

temperature exceeds 105°F (41°C), complete the following steps.

Using a small ﬂat-blade screwdriver, carefully pry the plug button

off the lever handle.

Loosen the setscrew on the handle with a hex wrench, then

remove the handle and bonnet.

Note the position of the locking ring relative to the inner geared

ring.

NOTE: To avoid damage to the locking ring during removal, pry

each side of the locking ring off the inner geared ring with an equal

and even technique.

Gradually pry each side of the locking ring up off of the inner

geared ring and onto the valve stem with a ﬂat-blade screwdriver.

Rotate the valve stem clockwise to increase temperature, or

counterclockwise to decrease temperature.

Reinstall the locking ring into the inner geared ring.

Reinstall the bonnet and handle to the faucet body.

Test the setting and make any adjustments as needed.

Plug Button

Handle

Bonnet

Inner

Geared

Ring

Locking Ring

Setscrew

Locking Ring

Inner Geared

Ring

Valve Stem

1050798-2-A 8 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Kohler K-19480-4-BN Installation Guide Page 8