Kohler K-331-4M-CP Installation Guide download pdf (Page 16)

13. Multi-Piece Lever Handle Installation

Verify that the valves are in the closed position.

CAUTION: Risk of product damage. Do not overtighten.

Overtightening may cause damage to the handle.

Install the stem extension to the valve stem.

Thread the bonnet onto the valve body.

Align the bath adapter over the stem extension so that the holes

line up horizontally. Secure with the screw.

Install the skirt cap to the end of the bath adapter.

Position the long sleeve over the handle arm.

Slide the O-ring onto the handle arm down to the long sleeve.

Insert the handle arm through the bath adapter.

Slide the short sleeve onto the handle arm up to rest on the bath

adapter.

Slide the washer onto the handle arm down to the short sleeve.

Thread the end cap onto the end of the handle arm to secure the

assembly.

Repeat for the other handle.

Open

Long Sleeve

Handle Arm

Stem

Extension

O-Ring

Skirt Cap

Endcap

Washer

Bonnet

Shown in Closed Position

Short Sleeve

Stem Screw

Bath Adapter

1008209-2-F 16 Kohler Co.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

No comments

Kohler K-331-4M-CP Installation Guide Page 16