Kohler K-1652-NA Installation Guide Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
Tools and Materials
Before You Begin
IMPORTANT! When using this unit, basic precautions should always be followed.
WARNING: Risk of personal injury. If you become uncomfortable while taking a steam bath, you
should power off the unit. Cool off with the shower, open the door, or exit the unit.
WARNING: Risk of allergic reaction. Before adding any oils, aromatic therapies, or skin care
products to the aromatherapy well, make sure they will not cause an allergic reaction to the user.
WARNING: Risk of personal injury. A steam bath can put undue stress on the body, as does any
hot bath, shower, or sauna. Therefore, the steam bath may not be suitable for use if you are
pregnant, have a heart condition, have high blood pressure, have circulatory problems, are under
the influence of alcohol, are taking drugs or are under the care of a physician.
WARNING: Risk of personal injury. DO NOT consume alcoholic beverages or take
medications/drugs prior to or when using the steam bath. Alcohol and drugs affect mental
judgement and inhibit bodily functions such as heartbeat and respiration, resulting in potentially
dangerous effects.
WARNING: Risk of injury to children. The steam generator is not designed to be used by
children. Do not allow children to use this unit unless they are closely supervised at all times.
WARNING: Risk of scalding. Do not block the steam head or locate it near a seat or bench, as the
steam head is hot during operation and may scald the user if touched.
DANGER: Risk of electrocution. Disconnect the electricity to the working area at the main breaker
panel before performing these installation steps.
WARNING: Risk of property damage. There should be a minimum of 12 (30.5 cm) of air space
around the steam generator at all times. This provides an area for the heat generated by the unit to
dissipate.
CAUTION: Risk of product damage. Do not apply excessive heat to the generator connections
when soldering. Do not apply flux or acids directly to the generator as damage to the seals, plastic
components, and trim finish may result. Do not apply petroleum-based lubricants to the generator
components, as damage may result.
WARNING: Risk of personal injury or property damage. Do not direct the pressure relief valve to
the enclosure. In the event the pressure relief valve activates, the hot water may spray causing
burns to the user and/or damage to the enclosure. Therefore, the pressure relief valve should be
• Tube-Flaring Tool
• 1-1/4" and 2-1/2" Masonry Bits
• Drain/Spill Pan
• Other Tools as Required
Plus:
Pipe
Wrench
Solder
Flux
Adjustable
Wrench
Propane
Torch
Tubing
Cutter
Drill
Silicone
Gun
Wire
Cutter
Sealant
Tape
1008019-2-J 2 Kohler Co.
Page view 1
1 2 3 4 5 6 7 ... 43 44

Comments to this Manuals

No comments