Kohler K-1954-0 Installation Guide download pdf (Page 9)

4. Adjusting the Module Location

NOTE: To achieve optimal module range and performance, the top

of the module may either lightly contact the bottom of the tank lid

or be within 1/4″ (6 mm) of the bottom of the lid. The tank lid and

module can be in contact with each other when the module is

installed, as long as the tank lid sits on the tank correctly when

closed.

Position the tank lid on the tank. Check for ﬁt. Conﬁrm the pads

are correctly installed.

Conﬁrm the module height allows the tank lid to rest in the

correct position.

If the module or bracket interferes with the tank lid, ﬁrst conﬁrm

the bracket is tight against the rim of the tank.

NOTE: To conﬁrm the tank lid is within 1/4″ (6 mm) of the

module, place four quarters on the module. If the tank lid touches

the quarters, the module is within 1/4″ (6 mm) of the tank lid.

Conﬁrm the top of the module is within 1/4″ (6 mm) or contacts

the bottom of the tank lid.

Adjust the bracket height as needed until the correct module

position is achieved.

Move the tank lid to a safe location when the adjustments are

complete.

1/4" (6 mm) Maximum

Lid

Kohler Co. 9 1216369-2-D

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

No comments

Kohler K-1954-0 Installation Guide Page 9