Kohler K-8817-CP Installation Guide download pdf (Page 6)

5. Alternate Control Knob Positioning

NOTE: Installing the control housing in this manner will not affect the drain operation shown on the

previous page.

If you prefer to position the control knob indicator opposite of positions #1 and #3 shown on the

previous page, insert the control knob and rotate the control housing 180°.

The control knob indicator should now point toward the front of the sink when the drain is open

and the back of the sink when the drain is closed.

6. Connect the Drain Control to the Cable

CAUTION: Risk of product damage. Do not kink or loop the cable.

NOTE: The cable drain is assembled properly when the control knob indicator points toward the drain

that is closed.

Determine the preferred position of the control knob indicator.

Connect the cable(s) to the control housing by placing the cable ends into the sockets and pushing

the cable connectors over the cable sockets.

Hand tighten the cable connectors to the control housing.

Connect the right hand drain cable to the right hand control connection. Connect the left hand drain

cable to the left hand control connection.

Control

Flange

Control

Housing

Rotate Control

Housing 180˚

Outer Flat

Toward Back of

Sink

Control

Housing

Sockets

Cable Connector

(Part of Control Body)

Cable Ends

113776-2-AB 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Kohler K-8817-CP Installation Guide Page 6