Kohler K-99696-NA Installation Guide download pdf (Page 10)

3. DTV+ System Layout

The ampliﬁer can be controlled digitally when connected to the

K-99695 system controller. The controller powers the interface(s) and

controls the ampliﬁer and other system components.

NOTE: A data cable is provided to connect the ampliﬁer to the

controller. If the ampliﬁer is not within 6’ (1.83 m) of the controller,

obtain a longer Ethernet-style cable or add an extension cable.

Disconnect the power from the ampliﬁer and the controller.

Connect one end of the data cable into the port on the back of the

ampliﬁer.

Connect the other end of the cable into one of the eight grouped

component ports on the controller.

Reconnect the power to the ampliﬁer and the controller.

Before Operating the DTV+ System For the First Time:

Download and install the latest software for connected components.

This may take an hour or more to complete based on system

conﬁguration and internet connection speed. Do not disconnect the

power from any components during software download and

installation.

For more information on system setup and operation, refer to the

guide on the controller product page at www.us.kohler.com.

Controller

Digital

Valve(s)

Speakers

AC Power

Component

Cable

Connections

Amplifier

6' (1.83 m) Data Cable

Router

Interface

(Up to Three)

Power

1232038-2-B 10 Kohler Co.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

No comments

Kohler K-99696-NA Installation Guide Page 10