Kohler K-6946-BN Installation Guide download pdf (Page 3)

1. Faucet Installation

IMPORTANT! Read these instructions carefully before beginning.

This bath spout offers a variety of installations. It can be installed

as a conventional bath spout or at a 40″ (101.6 cm) height for a

waterfall effect. Therefore, it is important to closely follow the

rough plumbing instructions so the bather can easily operate the

valve while sitting in the bath.

The bath spout does not have a diverter. For installations with

showers, use a faucet with a diverter on the yoke. For deck

mounted valves, make sure that the valves are easily accessible

by a bather sitting under the waterfall.

Do not install this bath spout on the long side wall of the recess

for 40″ (101.6 cm) high installations. It can be installed on the

long side wall or end wall for standard spout height installations.

Do not use with single control and mixer bath faucets, since these

faucets do not have a high enough ﬂow rate.

Piping and Valve Installation

Install the valve and piping as shown for either of the

installations illustrated.

For wall-mounted waterfall installations, turn each valve on its

side to permit the user to easily control them while sitting under

the waterfall.

Sheetflow Spout

(17.8 cm)

41"

(104.1 cm)

Max.

8-5/8"

(21.9 cm) Min.

9-5/8"

(24.3 cm) Max.

Sub-Floor

Top of Rim

(10.2 cm)

(20.3 cm)

Sheetflow

Spout

Kohler Co. 3 106868-2-AC

1 2 3 4 5 6 7 8 ... 19 20

No comments

Kohler K-6946-BN Installation Guide Page 3