Kohler Discovery User Manual download pdf (Page 20)

20

Push up and Latch

over the Top of the

Backplate

Align Flow Lever

as Shown

‘Click’ into Position

5. Align the flow control lever so that the

lever is pointing up (refer to illustration).

6. Slide the flow control lever and

concealing plate over the flow control

hub.

7. Latch the top of the concealing plate

over the top of the backplate.

Note! You will need to push the

concealing plate up and over the lip

on top of the backplate (refer to

illustration).

8. Clip the bottom of the concealing plate

into position.

9. Align the temperature control knob with

the hub and push the knob onto the

concealing plate.

Note! If the finished wall thickness is

less than 8 mm the temperature hub

spacer will need to be removed, refer

to section: ‘Commissioning’.

Note! The Thermostatic Shower

Control is preset to approximately

43°C at the factory. If adjustment is

required, refer to section:

‘Commissioning’.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments